Fullriver DC55-12 Deep Cycle Battery 12V 55Ah
Fullriver's AGM "DC" Series Battery has been designed specifically for frequent use.
The difference between the "HGL" and "DC" deep cycle battery range from Fullriver::
- 600 cycles at 75% Depth of Discharge ("DC" range) vs. approx. 350 cycles at 75% Depth of Discharge ("HGL" range)
- Extra Heavy Duty Grids
- Higher Power Density
- Deep Discharge Recovery
Deep-cycle batteries typically feature thick plates with a high-density active material.
The thick battery plates allow for reserve energy to be stored deep within the battery plate and released during slow discharge such as trolling or electronic instrument use. The high-density active material remains within the batteries' plate/grid structure longer, resisting the normal degradation found in cycling conditions.
They are typically used where the battery is discharged to great extent and then recharged.
Deep cycle refers to applications that typically discharge 60 to 70% or more of the battery capacity. An automotive battery is an SLI battery (Starting, Lighting & ignition). Its plates are designed to deliver maximum power for a short duration. Starting an engine typically discharges an SLI battery 3% or less.
When an SLI battery is used in a deep cycle application or in a vehicle with heavy accessory loads, the battery life will be shortened proportionally to how deeply and frequently it is discharged.
The Fullriver DC55-12 deep cycle battery uses a different chemistry for the plates' active paste material, and a slightly stronger acid. This chemistry allows for a much longer life in deep cycle applications with only a slight reduction in maximum power output.
General Features
- Superior Deep Cycle Design
- High Power Density
- Thick Plates and High-density
- Active Material
| Voltage: | 12 Volts |
| CCA:(cold cranking amps): | 540 |
| AH (20hr): | 55 |
| Dimensions | |
| Length: | 229mm |
| Width: | 138mm |
| Height: | 208mm |
| Total Height (with Terminals): | 228mm |
| Terminal Type: | M6 |
| Other Features: | |
| Weight: | 17.6kg |
| Plate Type: | Cycle Alloy |
| Separator Type: | Absorbed Glass Mat |
| Usage: | Deep-Cycle Stand By Starting Marine |
| Warranty: |
12 months for normal power system operation
6 months for traction and industrial application |
